Diamond Edged Metal Cut Off Wheels

2 comments

For years we have been using bonded cutting wheels for our metal cutting needs, and for years we’ve understood their limitation and danger.  A rotation disc at 13,000 rpms that could explode at any minute. Not only can they break up and hurt users and people standing by, they don’t really last that long.

Over the last few years we have seen quite a few alternatives come to the market for metal cutting, not only with grinders but better reciprocating blades, cordless band saws, cordless metal cutting saws. Truth is grinders throw a lot of sparks and can be unpredictable and injure users, but the tool is cost effective and accessories are cheap comparatively.

With so many available diamond edged blades available now, the costs have come down a little bit and more manufactures are getting on board. I tested out five different blades that are widely available and a varied range of pricing. Three of those blades I found to be very similar but one out performed the other. The great thing about these blades is the life you get out of these blades and in terms of the cost you shell out, you will save money over traditional bonded discs.

So lets look at the blades first:

Masterforce Metal Cutting Diamond Blade – $12 @ Menards

Screen Shot 2017-08-17 at 5.11.21 PM

Only Available in a 4 1/2″ disc for a very modest price. You will notice it is a segmented style blade that shares design with two other blades we tested. The blade cuts nicely but average compared to the competition. It does cut slower than a traditional bonded discs but throws smaller sparks. This blade claims 65x life than a bonded blade.

 

RIDGID Metal Cutting Diamond BladeScreen Shot 2017-08-17 at 5.12.25 PM – $12 @ Home Depot

Strikingly similar in design and performance with the Masterforce, this blade too only is available in 4 1/2″ size. The Ridgid too cuts slower than a bonded wheel but lasts considerably longer at its claimed 70x. The only difference with this blade are the relief holes drilled around the cutting edge.

 

 

Milwaukee Steelhead – $20-$30 available at most Milwaukee Retailers

Screen Shot 2017-08-17 at 5.15.39 PM

The last of this style blade we tested. This is the most aggressive blade we used, throwing larger metal fragments around the shop. It cuts quicker than a traditional bonded wheel and features a good amount of diamond coating over the other competition. The Steelhead is available in a few different sizes, the one tested was a 4 1/2″.

 

Lenox Metal Max – $15 @ Amazon, Lowes

Screen Shot 2017-08-17 at 5.18.27 PM

This is a prime example of competition lowering prices, this blade used to be a 30 dollar blade. The Lenox is the smoothest and quickest blade that we tested. Unlike the Milwaukee’s aggressive grit, this blade achieves quick cuts but does not throw large pieces of metal. The Metal Max has the largest variety of sizes going all the way to 14″ blades. This blade claims 1000 + cuts and a 30x longer life than bonded wheels.

 

Diablo Diamond Wheel for Metal Cutting – $15 @ Home Depot

Screen Shot 2017-08-17 at 5.13.48 PM

This blade had the boldest claim at 100x life over bonded wheels. This contender was the only continuous rim design which I believe hinders its performance. The Diablo generated bad vibrations throughout many cuts as well as the slowest cutting discs in the fight including the bonded wheel. The blade is available in a large variety, over 6″ become a segmented blade.

 

 

The Test

For the test I used 7 amp corded angle grinders from Dewalt and Porter Cable. Both grinders spin at 12,000 rpms and share the same motor and and housing designs. The metal that was used in the cut was 100 cuts in 1″ x 1/8″ thick angle iron, (50 cuts followed by the next two material followed by 50 more cuts,) 30 cuts in 3/4″ square tubing and 10 cuts in 1/4″ x 2″ bar stock. Each blade was subjected to continuous cutting until all 140 cuts were achieved.

The Results

After quite a few hours of testing and a large mess on the floor the results are fairly clear. The blades overall performed very similarly but with a few that performed better than the rest. The Lenox Metal Max was the smoothest and quickest cutting. No matter what the material was the blade slid through like a hot knife through butter, throwing an expected amount of sparks. The cuts were clean and quick making it easy on the user for cut after cut. Followed in a close second I rank the Milwaukee Steelhead. This is just a beast for a blade, I loved it maybe more than the Lenox but the grit is extremely aggressive. Many times throughout the cutting I was subjected to large portions of burning metal, no other blade made it rain like the Steelhead. Its design is very similar to the Masterforce and Ridgid but the difference is in the edge. Originally a $50 blade its $20 price is well worth its performance. If you are doing a lot of cutting this is a viable option for you. Middle of the pack performers were the Ridgid and Masterforce blades. Being very similar design they performed rather equally. Minimal vibration was felt though the user but the speed was not the quickest. Going through the thicker bar stock the blades slowed their cut. With the less aggressive grit they did not throw the sparks like the Milwaukee did. Following at the rear is the most disappointing of all, the Diablo. I had higher hopes for this blade but its lack of segmentation led it to slower cuts. The worst of all was the issue my blade had through the first 50 cuts. There was a bad vibration in the blade that almost made it feel slightly warped when the edge would heat up. Once the coat wore down the blade smoothed out a good amount but the speed still lacked. For the money the Ridgid/Masterforce is a better option of the casual user.

IMG_1095IMG_1096IMG_1097IMG_1098IMG_1099

Overall the blades all performed in terms of life very well with plenty of life left in them. Its great to see the premium of these blades come down as it makes this technology more available and creates safer work environments. Grinders are a lot of fun but a very dangerous tool and safety starts with the user itself. These discs are a bit of an investment but the price of 5 bonded wheels it pays for itself. For comparison I started the fight off with a Pferd bonded cut off wheel, after 15 cuts the discs lots around 1/2″ of material. I am confident that ALL of these blades including the Diablo will cut at least 150 more cuts if not more than that. This test was a lot of fun but most importantly I learned about these blades throughout the process and from this point forward, bonded cutting wheels will not be in my tool box, stay safe and throw some sparks my friends.

 

 

 

2 comments on “Diamond Edged Metal Cut Off Wheels”

  1. Great review!!! I’ve been curious to these blades and have not been too happy with the abrasive type blade that can explode in your face. I hope that my local lowes still has those Lennox blades in stock. Thanks for the insight it’s been very helpful.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s