Table Saw Throat Plate Not Flush (5 Problems + Solutions)

Table saw enables us to cut things, especially hard objects. And one of the few most important things about it is the throat plate.

If it does not work or place fine, you can not proceed properly. You would come up with many problems actually!

So, what happens if the table saw throat plate does not flush?

The first problem of a throat plate unable to flush is the blade is not aligned. However, the bevel gauge could be misaligned due to this too. Do not forget that you may experience unusual effects like noises or stall too. And lastly, the table saw may also turn off due to this.

This answer would clarify the problems. However, you can not move on without the solutions of these. And that is what we got here.

5 Reasons Behind Table Saw Throat Plate Not Flush

Table saws are very useful in daily life. Starting from wood to cutting stainless steel, we use them. But issues with this can be problematic.

If the table saw throat plate does not flush, there would be issues. You already know it by now. But what are the problems if the table saw throat does not flush?

Problem 1: Misalignment of the Table Saw Blade

The main problem with this would be with the blade. That means the table saw blade would have issues due to this. 

So, what happens to the saw blade if the throat plate does not flush?

Well, this would not enable you to change the blades properly. And this could also be responsible for table saw blade spinning issues.

Like, you may need to change the blade of your table saw at times. And due to this, you would have issues changing the blade.

Basically, even if you think you did it right, it would not be okay. Because you can not align the new blade properly it.

As a result, your projects or work would not be perfect but lawful.

Problem 2: Misalignment of the Bevel Gauge

You could occasionally realize that your saw bevel gauge is not properly aligned. Even if you are not aware of it, it will still cause symptoms.

You would observe that the cutting angles were not what you desired. Additionally, the miter saw would not be able to cut through items completely.

If there is a collision, the bevel gauge will become out of alignment. For instance, you can be putting something that is far thicker than it can support.

The bevel gauge may then experience pressure, which could lead to alignment issues. Your saw blade may begin to sway as a result of this.

Problem 3: Noise of the Table Saw

Due to the issues of the throat plate, you may hear noises at times. Yes, you read that right. So, why does the table saw make noise?

See, if the throat plate is not placed properly, it may come in contact. Like, it can touch the other parts of the saw that isn’t supposed to be. 

In that case, it may have friction while you are trying to operate the table saw. And for this action, the table saw may start making noise. 

Perhaps, it is not the table saw that is making the noise. But it is the throat plate that is having friction and making noise.

This noise could be screeching or normal. However, it is mostly screeching noises most of the time.

Problem 4: Stall of the Table Saw

Table saw throat flushing issues would have some consequences that you may not guess. Yes, that is what it is. And one of those problems could be the table saw stalling.

So, why is the table saw stalling? Well, due to the throat plate issues, it may be out of its actual position. And the throat plate may also come in contact with friction.

This is why the table saw would have extra pressure. No matter if it is noticeable or not. But it would have an adverse effect. 

As a result, the table saw may start shaking at times. Like, it would give sudden bumps all of a sudden. And following that, you could also experience the table saw stalling.

So, that is when the table saw may start stalling for the throat plate. And this can affect its lifetime just like the lifetime of miter saw blades.

Problem 5: Table Saw Turning off

This problem is not that common actually. However, it still happens at times. And that is the table saw turning off due to the throat plate. 

It mainly happens when the throat plate eventually leaves internal issues. It does not happen at a glance. But it actually happens taking time for this.

So, these are the main problems if the table saw throat plate does not flush!

How Do I Flush the Table Saw Throat Plate?

You now know about the problems that may arise from this. But you may still not be able to fix this. So, how to fix the table saw throat plate that doesn’t flush?

Take a look at the steps to have a clearer idea.

Step 1: Take off the Current Throat Plate

At first, you need to take off the throat plate. Because it does not flush due to its thickness issues. 

So, you need to take measurements of the case and then note them down. Once you do this, mark the measurements.

Now, you need to cut down the throat plate according to the measurements. 

Step 2: Match the Measurements

Once you cut this down, see if this goes along with the case. Try to put the throat plate in there. Now, mark the case again.

Because you need to broaden down a bit. Basically, you cut down a bit of the blade place. So that the throat plate sits fine into that.

And finally, you can put it down to get started again. But if you think this still needs more modification, take help. That means you need to talk to an expert about this.

FAQs

Does every table saw have a throat plate?

Yes, every table saw has a throat plate today. These are actually removable so that you can take them off anytime you need to do so. You can use these to change the blades very easily. And this can also come in handy while cutting things off with a proper alignment.

Can I replace the table saw throat plate anytime?

Well, yes, you can replace the table saw throat plate. However, you need to see if it is actually needed or not. Because the throat plate may just be fixed at times. That means you do not need to get a new one. Rather you can just fix it. However, this may also need replacement at times.

How much does a table saw throat plate cost?

Well, a table saw throat plate does not cost that much, to be honest. To get one, you may be spending around $20. These throat plates could be even cheaper. However, $20 is the typical cost to get one of these. In case you need someone to install it, that would increase the budget.

The Final Words

Now you know what happens if the table saw throat plate does not flush! And you have already got here all the solutions to the issues.

About it, you must be aware of one thing. See, if the throat plate is properly aligned. Because some people fail to notice it first. And then this really gets messed up. You can not undo the mess though.

So, be careful!

Leave a Comment

Your email address will not be published. Required fields are marked *